View SLV6D-FKB_9102931.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ct1314.003 product family data sheet cree ? plcc6 3 in 1 smd led SLV6D-FKB www.cree.com/hb copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description these smd leds are packaged in an industry standard plcc6 package. these high performance tricolor smt leds are designed to work in a wide range of applications. a wide viewing angle and high brightness make these leds suitable for various full color applications. the encapsulation resin contains uv inhibitors to minimize the effects of long-term exposure to direct sunlight, resulting in stable light output over the life of the led. features ? size (mm):5.5 x 5.5 ? dominant wavelength: red (619 - 624nm) green (520 - 540nm) blue (460 - 480nm) ? luminous intensity (mcd) red (560 - 1120) green (900- 1800) blue (180 - 450) ? moisture sensitivity level: 5a ? lead-free ? rohs compliant ? m a tte surface cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 applications ? decorative lighting ? amusement * :this part is tested under the condition of assembling it on a pcb with isolating the electrical path b y silicone. the leads area of the led is not ipx8 rated and its required to insulate for moisture by customer in outdoor application.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 2 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 2 cree plcc6 3 in 1 smd led SLV6D-FKB absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit r g b forward current note 1 i f 50 35 35 ma peak forward current note 2 i fp 200 100 100 ma reverse voltage v r 5 5 5 v power dissipation p d 125 126 133 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c junction temperature t j 110 110 110 c junction/ambient 1 chip on r thja 450 400 450 c/w junction/ambient 3 chips on r thja 650 580 680 c/w junction/solder point 1 chip on r thjs 230 230 200 c/w junction/solder point 3 chips on r thjs 230 230 200 c/w electrostatic discharge classifcation(mil-std-883e) esd 1000 v note: 1.single-color light. 2.pulse width 0.1 msec, duty 1/10. typical electrical & optical characteristics (t a = 25c) characteristics condition symbol values unit r g b dominant wavelength i f = 15 ma(r) i f = 10 ma(g) i f = 10 ma(b) dom 619~624 520~540 460~480 nm spectral bandwidth at 50% i rel max i f = 15 ma(r) i f = 10 ma(g) i f = 10 ma(b) 24 38 28 nm forward voltage i f = 15 ma(r) i f = 10 ma(g) i f = 10 ma(b) v f(avg) 2.0 2.8 3.0 v v f(max) 2.5 3.6 3.8 v luminous intensity i f = 15 ma(r) i f = 10 ma(g) i f = 10 ma(b) i v(min) 560 900 180 mcd i v(avg) 780 1200 280 mcd reverse current (max) v r = 5 v i r 10 10 10 a
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 3 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 3 cree plcc6 3 in 1 smd led SLV6D-FKB intensity bin limit (red i f = 15 ma, green i f = 10 ma, blue i f = 10 ma ) color bin limit (red i f = 15 ma, green i f = 10 ma, blue i f = 10 ma ) tolerance of measurement of luminous intensity is 10%. tolerance of measurement of dominant wavelength is 1 nm. red bin code min.(mcd) max.(mcd) k 560 710 np 635 805 m 710 900 qr 805 1010 n 900 1120 green bin code min.(mcd) max.(mcd) n 900 1120 st 1010 1260 p 1120 1400 vw 1260 1600 q 1400 1800 blue bin code min.(mcd) max.(mcd) e 180 224 bc 202 252 f 224 280 de 252 318 g 280 355 fg 318 403 h 355 450 red bin code min.(nm) max.(nm) rb 619 624 green bin code min.(nm) max.(nm) g7 520 525 g23 522.5 527.5 g8 525 530 g45 527.5 532.5 g9 530 535 g67 532.5 537.5 ga 535 540 blue bin code min.(nm) max.(nm) b3 460 465 b23 462.5 467.5 b4 465 470 b45 467.5 472.5 b5 470 475 b67 472.5 477.5 b6 475 480
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 4 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 4 cree plcc6 3 in 1 smd led SLV6D-FKB order code table* kit number color luminous intensity (mcd) dominant wavelength (nm) pack - age min. max. color bin min. (nm) color bin max. (nm) SLV6D-FKB-cknnqehbb7a363 red 560 1120 rb 619 rb 624 reel green 900 1800 g7 520 ga 540 reel blue 180 450 b3 460 b6 480 reel SLV6D-FKB-ck1n1e1bb7d3d3 red any 1 intensity bin from k(560) - n(1120) rb 619 rb 624 reel green any 1 intensity bin from n(900) - q(1800) any 1 hue bin from g7(520) - ga(540) reel blue any 1 intensity bin from e(180) - h(450) any 1 hue bin from b3(460) - b6(480) reel SLV6D-FKB-cm1p1f1bb7d3d3 red any 1 intensity bin from m(710) - n(1120) rb 619 rb 624 reel green any 1 intensity bin from p(1120) - q(1800) any 1 hue bin from g7(520) - ga(540) reel blue any 1 intensity bin from f(224) - h(450) any 1 hue bin from b3(460) - b6(480) reel notes: 1. the above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. only one intensity-bin code and one color-bin code will be shipped on each reel. single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. for example, any 1 intensity-bin from k - n means only 1 intensity-bin (k or np or m or qr or n) will be shipped by cree. 3. for example, any 1 color-bin from g7 - ga means only 1 color-bin (g7 or g23 or g8 or g45 or g9 or g67 or ga) will be shipped by cree. 4. please refer to the cree led lamp reliability test standards document for reliability test conditions. 5. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 5 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 5 cree plcc6 3 in 1 smd led SLV6D-FKB graphs the above data are collected from statistical fgures that do not necessarily correspond to the actual parameters of each single led. hence, these data will be changed without further notice.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 6 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 6 cree plcc6 3 in 1 smd led SLV6D-FKB graphs the above data are collected from statistical fgures that do not necessarily correspond to the actual parameters of each single led. hence, these data will be changed without further notice.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 7 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 7 cree plcc6 3 in 1 smd led SLV6D-FKB mechanical dimensions all dimensions are in mm. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or other - wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2002/95/ ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 8 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 8 cree plcc6 3 in 1 smd led SLV6D-FKB kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed by ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following man - ner:
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 9 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 9 cree plcc6 3 in 1 smd led SLV6D-FKB reliability tests and results test applicable standards test condition note number of damaged temperature cycle jeita ed-4701 100 105 -40c~25c~100c~25c 30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/45 thermal shock mil-std-202g -40c~100c 30 mins, 30 mins 100 cycles 0/45 moisture resistance jeita ed-4701 200 203 25c~65c~ 90%rh 24hrs/1cycle 10 cycles 0/45 high temperature storage jeita ed-4701 200 201 t a =100c 500 hrs 0/45 temperature humidity storage jeita ed-4701 100 103 t a =60c rh=90% 500 hrs 0/45 low temperature storage jeita ed-4701 200 202 t a =-40c 500 hrs 0/45 high temperature life test - t a =85c i f =15 ma 1000 hrs 0/45 life test - t a =25c if: r=30ma g=35ma b=20ma 1000 hrs 0/45 high humidity heat life test - 60c rh=90% i f =15 ma 500 hrs 0/45 low temperature life test - ta=-40c if: r=30ma g=35ma b=20ma 500 hrs 0/45 resistance to soldering heat(refow soldering) jeita ed-4701 300 301 t sol =250c,10sec (pre treatment 30c,70%,168hrs) 2 times 0/45 vibration-variable frequency mil-ste-883 method 2007 20g min, 20 to 2000hz, 4cycles, 4mins, each x,y,z / 0/45 electrostatic discharge test aec(q101-001) human body model 1000 v (forward and reverse current conduct electricity each 1time) / 0/45 failure criteria item symbol test condition criteria for judgment min. max. forward voltage v f i f = 20 ma C initial data x 1.1 reverse current i r v r = 5 v - 10 a luminous flux/intensity v i f = 20 ma initial data x 0.7 - resistance to soldering heat - i f = 20 ma no dead lamps and visual damage vibration-variable frequency - i f = 20 ma no dead lamps and visual damage
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 10 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 10 cree plcc6 3 in 1 smd led SLV6D-FKB reflow soldering ? the SLV6D-FKB is rated as a msl 5a product. ? the recommended foor life out of bag is 24hrs. ? the temperature profle is as below: use only with SLV6D-FKB soldering pad: solder average ramp-up rate = 4oc/s max preheat temperature = 150oc ~200oc preheat time = 120s max ramp-down rate = 6oc/s max peak temperature = 250oc max time within 5oc of actual peak temperature = 10s max duration above 217oc is 60s max do cu m ent no .: c ot co - 05 - 0057 rev . n o. : 13 6 / 9 m e l t i ng - po i nt p r e - heat s oak r e f l ow c oo li ng t ime t e m p e r a t u r e u se a ll s m d b es i d es l p 6 - n pp 1 - 01 - n1 s o l d e r = s n 63 - p b 37 s o l d e r = l ea d -f r ee a ve r ag e r a m p - up r a t e = 4 o c / s m a x. a ve r ag e r a m p - up r a t e = 4 o c / s m a x p r e h e a t t e m p e r a t u r e = 100 o c ~150 o c p r e h e a t t e m p e r a t u r e = 150 o c ~200 o c p r e h e a t t i m e = 100 s m a x. p r e h e a t t i m e = 100 s m a x. r a m p - do w n r a t e = 6 o c / s m a x. r a m p - do w n r a t e = 6 o c / s m a x. p e a k t e m p e r a t u r e = 230 o c m a x. p e a k t e m p e r a t u r e = 250 o c m a x. t i m e w i t h i n 5 o c o f a ct ua l p e a k t e m p e r a t u r e = 10 s m a x. t i m e w i t h i n 5 o c o f a ct ua l p e a k t e m p e r a t u r e = 10 s m a x. d u r a t i on abo ve 183 o c i s 80 s m a x. d u r a t i on abo ve 217 o c i s 80 s m a x. o n l y u se l p 6 - n pp 1 - 01 - n1 [ 13] s o l d e r = lo w l ea d -f r ee a ve r ag e r a m p - up r a t e = 3 o c / s m a x. p r e h e a t t e m p e r a t u r e = 130 o c ~170 o c p r e h e a t t i m e = 120 s m a x. r a m p - do w n r a t e = 6 o c / s m a x. p e a k t e m p e r a t u r e = 213 o c m a x. t i m e w i t h i n 3 o c o f a ct ua l p e a k t e m p e r a t u r e = 25 s m a x. d u r a t i on abo ve 200 o c i s 40 s m a x . r e co mm e nd e d so l d e r pad d e si gn f o r h e a t d i ssi pa t i on ( 2 - p i n s m d l e d ) : 0 . 5 7 . 5 7 .0 4 . 5 2 .6 1 . 5 ? r e co mm e nd e d so l d e r pad d e si gn f o r h e a t d i ssi pa t i on ( 4 - p i n s m d l e d ) 8 .2 1 . 7 1 . 3 1 . 7 0 . 4 7 5 5 . 6 5 2 .7
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 11 copyright ? 2017 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 11 cree plcc6 3 in 1 smd led SLV6D-FKB ? the boxes are not water resistant and they must be kept away from water and moisture. ? the leds are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. ? cardboard boxes will be used to protect the leds from mechanical shocks during transportation. ? the reel pack is applied in smd led. ? max 3000 pcs per reel. packaging

▲Up To Search▲

Price & Availability of SLV6D-FKB

	To Download SLV6D-FKB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .